Related Manuals for Robot Factory 3DLPrinter Series
Summary of Contents for Robot Factory 3DLPrinter Series
- Page 1 3DLPrinter 3DLPrinter-HD 3DLPrinter-HD 2.0 Technical Note 07/15 Advices for a good printing result April 8, 2015...
- Page 2 Technical measures regarding 3DLPrinter Series printers: Below the steps to follow in order of importance: With regard to the printer: 1- Lens cleaning: gently clean the lens with one of the wipes supplied with the printer, making sure the wipe is slightly moist (otherwise don't use this one for wipe, because you risk to crawl the lens).
- Page 3 8- Structural supports: Put structural supports (these have to sustain the object in the first phase of printing), so that they build a solid structure, ensuring the construction of the object (avoid to create supports with a diameter less than 1 mm, especially if the height of these exceeds 10 mm), you can refer still to Technical-Note_06-14.
- Page 4 With regard to resin and exposure times: 1- Resin Types: it is important to know the specific characteristics of the resin used with our printers and the different factors affecting it, taking in account the technical note "Our resins" (in the folder "Resins" in the DVD supplied with the printer). 2- Basis Exposure Times: the exposure times of the bases are very important, in order to obtain a perfect adhesion of the object to the Construction Base of the printer, and then a good printing result.
- Page 5 residues inside, you will need to dip the object again, for a few seconds, in another plastic tray containing the liquid spotless clean. 4- Drying: At the end of the cleaning cycle, remove the object using the plastic gripper and place it on the work plane, suitably covered with absorbent paper.
- Page 6 Robot Factory S.r.l. reserve to themselves the right to make changes in specifications, materials and accessories without prior notice. No warranty is provided unless this one attached to the product. Robot Factory S.r.l. assumes no liability for any incidental or consequential, foreseeable or not, caused by misuse of its products.
Need help?
Do you have a question about the 3DLPrinter Series and is the answer not in the manual?
Questions and answers