Advertisement
Quick Links
Advertisement
Related Manuals for Robot Factory 3DLPrinter
Summary of Contents for Robot Factory 3DLPrinter
- Page 1 3DLPrinter 3DLPrinter-HD Technical Note 01/14 Manual installation of the USB device May 26, 2014...
- Page 2 Follow CAREFULLY these steps Make sure you have followed the instructions for driver installation and firmware update program, referring to page 5 of the manual "Printer3DLP - Installation and use of the program." Connect the power cord, press the power switch at the back of the printer, plug the printer's USB cable into a free socket of the PC, press, on front of the printer, the start button for a few seconds (until it...
- Page 3 In the window that appears select “Device Manager” In the "Device Manager" window identify the "Unknown device". Pag. 3 di 8...
- Page 4 With the right mouse button open the selection window and choose “Update Driver Software”. From the window that appears select Browse my computer for driver software Pag. 4 di 8...
- Page 5 Press the Browse button Select the folder C:\3DLP\Drivers and press the OK button. Press the Next button Pag. 5 di 8...
- Page 6 If the Windows Security appears, select Install this driver software anyway At the end of the installation, press the Close button Pag. 6 di 8...
- Page 7 In the Device Manager window, you can see the proper installation of device. If you are using Windows 8, for installation refer to the following link: https://learn.sparkfun.com/tutorials/disabling-driver-signature-on-windows-8/all Pag. 7 di 8...
- Page 8 Robot Factory S.r.l. reserves the right to make changes in specifications, materials and accessories without notice. No warranty is provided beyond that attached to the product. Robot Factory S.r.l. assumes no liability for any incidental or consequential, foreseeable or not, caused by misuse of its products.
Need help?
Do you have a question about the 3DLPrinter and is the answer not in the manual?
Questions and answers