Installing Expansion Cards - T-MAG K6 User Handbook Manual

Installing expansion cards

See "Removing the
chassis cover" on
page 8.
18 18
Installing expansion cards
Your K6 system features one 32-bit AGP bus, one ISA bus, four PCI
bus, and one shared ISA/PCI bus expansion slots. (See page 10.)
Caution
Turn off the primary system power switch on the back of the
computer before installing or removing any device.
Observe static electricity precautions. See the warnings on
page 7.
Remove the chassis cover.
1.
Select an empty expansion slot and remove the corresponding slot
2.
cover. Keep the slot cover mounting screw nearby.
Holding the edge of the expansion card, carefully align the edge
3.
connector with the expansion slot.
K6 Systems User's Handbook
Working with K6 System Hardware Working with K6 System Hardware