Cpu Cooling Fan (Jp43); Power Switch Jumper (Pw2); Reset Jumper; Speaker Jumper - T-MAG K6 User Handbook Manual

K6 Systems User's Handbook
Working with K6 System Hardware Working with K6 System Hardware

CPU cooling fan (JP43)

Pin
1
2
3

Power switch jumper (PW2)

Connect the power switch (momentary switch type) to this jumper.

Reset jumper

Connect the Reset button to the Reset jumper.

Speaker jumper

Connect the speaker to the Speaker jumper.

HDD LED jumper

Connect the HDD LED to the HDD LED jumper.

Keylock - PWLED jumper

Connect the Keylock and Power LED to this jumper.

Auto Voltage Detect disable (JP1)

Remove this jumper if you use an older type of CPU that cannot be
identified.
Function
GND
12 V
sensor
Jumper settings
13 13