NewAir NWC029SS01 Owner's Manual page 16

Problem
The LED display does
not work.
There is an LED
display error, or the
LED displays "LO".
The buttons do not
function.
www.newair.com
Possible Causes
The door is not
properly installed.
The seal is weak.
The shelves are out of
position.
There may be a
problem with the main
control board.
There is a problem with
the plug.
The cooling kit is no
longer working
properly.
The PC Board is faulty.
The temperature
control panel may be
damaged.
Solution
Check the door hinges
to make sure they are
properly installed.
Replace the seal on the
door.
Replacements can be
acquired from the
manufacturer.
Make sure the shelves
slide all the way into the
unit.
Contact the
manufacturer.
Contact the
manufacturer.
Contact the
manufacturer.
Contact the
manufacturer.
Contact the
manufacturer.
EN
16