Keying in the service settings manually
1. Press Menu, and select Services,
2. Select
Active service
You need to activate the set where you want to save the service settings. A set
is a collection of settings needed for making a connection to a WAP service.
3. Scroll to the set you would like to activate and press Activate.
4. Select
Edit active service
Select each of the following service settings one by one and key in all the
required settings.
•
Settings' name
•
Homepage
- Key in the homepage address of the WAP service that you
want to use, press
•
Session mode
- Select
•
Connection security
When the connection security is On, the phone tries to use a secure
connection with the WAP service. If a secure connection is not available,
the connection will not be made. If you wish to connect anyway, with a
non-secure connection, you must set the connection security to Off.
•
Data bearer
- Select
Settings when GSM data is the selected data bearer
GPRS is the selected data bearer
Settings
settings.
settings.
- Key in the new name for the connection set and press OK.
for a dot, and press OK.
Permanent
or Temporary.
- Select
On
or Off.
GSM data
or GPRS. Settings for the selected bearer, see
below.
©
Copyright
2003 Nokia. All rights reserved.
and
Connection
settings.
and
Settings when
126