Microsoft Flight Simulator DOUGLAS DC-3 Operation Manual page 5

7
SU R FA C E C O N T RO L
SY ST E M
This system consists of elevators,
ailerons and rudder, which are made of metal
frames covered with fabric. There are all-metal trim
tabs on the elevators,the right aileron and on the
rudder.
Operate trim tabs for the elevators by means
of a wheel on the left side of the pedestal.
Operate trim tabs for the ailerons and
rudder by means of hand cranks on the lower part
of the pedestal. Scales indicate amount of
deflection on each tab.
8