Draining - MAINGEAR F131 Maintenance Manual

Draining

Draining an APEX open loop system
• Set down a bucket to catch all fluid removed from the loop.
• Remove the rubber cover on the fitting at the bottom of the
APEX block. Attach a drain tube to the fitting and guide it to
the bucket to catch the liquid that will be drained. ........ Ref 7
• The right fitting on the top of the APEX block is an air
exhaust button. When pressed down, it will allow the liquid to
be pushed down and drained through the bottom into the
bucket. ........................................................................................... Ref 8
Reference 7 Reference 8
9