Advertisement
Quick Links
Multi technology RFID Readers
MTPX-MHWO, MTPX-MW, MTPX-HW, MTPX-HO, MTPX-MHW, MTPX-MO, MTPX-MWO
SPECIFICATIONS
Reference
Technology
RFID 125 KHz
RFID 13.5 MHz
Interface
Wiegand Output
OSDP Interface
WS4 Interface
Customised
RS-485 Output
Supported
credentials
EM4100
HID 125 KHz Compatible
HID iClass CSN
Mifare CSN (Classic,
Desfire, Plus, Ultralight),
NTAG CSN
ISO 15693
Encrypted DesFire*
(EV1, EV2, EV3)
Technical
characteristics
Power Supply
Maximum current
consumption @ 12 VDC
Sound Indicator
Led Indicators
Micro USB connector
Environmental rating
Operating temperature
Operating humidity
Mounting
Panel Connection
Dimensions (H x W x D)
INSTALLER'S MANUAL
MTPX-MHWO
MTPX-MW
X
X
X
X
X
X
150 mA
150 mA
Built-in Micro USB connector for protocol selection, configuration and firmware update
www.xprgroup.com
MTPX-HW
MTPX-HO
X
X
X
X
X
X
X
X
X
X
X
X
X
X
9 - 15 VDC
60 mA
60 mA
Internal buzzer
Red, Green and Orange (Red + Green)
Outdoor, IP65
-30°C to +60°C
5% - 95% relative humidity, non-condensing
Surface mount
Terminal
92 x 51 x 27 mm
EN
MTPX-MHW
MTPX-MO
X
X
X
X
X
X
X
150 mA
150 mA
Rev. 1.02 - 30.01.2023
MTPX-MWO
X
X
X
150 mA
1
Advertisement
Summary of Contents for xpr MTPX-MHWO
- Page 1 Multi technology RFID Readers MTPX-MHWO, MTPX-MW, MTPX-HW, MTPX-HO, MTPX-MHW, MTPX-MO, MTPX-MWO INSTALLER’S MANUAL SPECIFICATIONS Reference MTPX-MHWO MTPX-MW MTPX-HW MTPX-HO MTPX-MHW MTPX-MO MTPX-MWO Technology RFID 125 KHz RFID 13.5 MHz Interface Wiegand Output OSDP Interface WS4 Interface Customised RS-485 Output Supported...
- Page 2 MOUNTING Rubber gasket 5 mm 3 (3 x 30mm) 1 (M3 x 8mm) Back Front MOUNTING WITH MT-SPACER 6 mm 2 (4 x 30mm) 3 (M3 x 8mm) 1 (M3 x 8mm) FERRITE CORE MOUNTING • Wrap the wires around the ferrite core (1 turn). •...
- Page 3 TERMINALS OSDP WIEGAND CUSTOM RS-485 TERMINALS DESCRIPTION CONFIGURATION CONFIGURATION CONFIGURATION CONFIGURATION RS-485 line RS-485 A (+) RS-485 B (+) RS-485 A (+) RS-485 line RS-485 B (-) RS-485 B (-) RS-485 B (-) Output Output Input 1 Input Green LED input Green LED input (Dry contact to GND only) Input 1...
- Page 4 SOFTWARE SETTINGS XPR Toolbox is software for settings and firmware update of the reader. XPR Toolbox can be downloaded from a https://software.xprgroup.com/. To setup the reader or update the firmware, run the XPR Toolbox and select ”Genera- tion 2” and the appropriate model, and click on “Open” tab. Follow the instruction in the software to set up or update firmware.