PRUNUS J-157 Digital Clock Radio User Manual
Thank you for purchasing the PRUNUS J-157 radio. In order to get the best from the radio please read this manual care-
fully before using it.
Functional components
①
Power switch/Flashlight switch/SOS alarm
②
Band switch(AM/FM )/Scan and memory radio channels
③
Volume up/Time set/Next stored
④
Volume down/Alarm clock/Previous stored
⑤
⑥
UP button
⑦
DOWN button
⑧
Timer button
⑨ Lanyard/Aerial
⑩
Flashlight
bulb
⑪
Earphone jack
Power Supply
1. The radio requires 2 AAA batteries which can be replaced. Please install the batteries before using it.
2. If you will not use the radio for a long time, please take out the batteries.
3. Change the batteries in time if the sound is distorted or the volume is faint.
4. Keep the product away from liquid or overheated environment.
Radio reception
1. Press <①
Power switch> to turn on the radio.
2. Press <②
Band switch/Scan and memory radio channels> to switch to "FM" or "AM" band.
3. How to search and store channels?
1) Long press<②
Band switch/Scan and memory radio channels> to automatically search, store and number the channels
around you. The channels are sorted incrementally as "P00""P01" ...
2) Long press <⑥
UP button> or <⑦
when there is a channel, it will stop searching and play the current channel automatically.
4. Press <③
Volume up/Time set/Next stored>or <④
channels.
5. Long and continuously press <③ Volume up/Time set/Next stored>or <④ Volume down/Alarm clock/Previous stored>
to adjust the volume.
6. Press <①
Power switch> to turn off the radio directly (Attention: When the radio is OFF, it will turn into clock mode).
Note:
◆Adjust the position and rotate the radio to get the best reception.
◆In order to get better reception, when using the radio indoors, please approach it to the window and do your best to keep
it away from the electronic devices (such as computers, TVs, refrigerators, mobile phones, etc).
Clock/Alarm Function
1. How to set time?
1) Press <①
Power switch> to turn into clock mode.
2) Long press <③
Volume up/Time set/Next stored> to set the clock time.
3) Press <⑥
UP button> or <⑦
you need to choose in this period.
4) Then press<③
Volume up/Time set/Next stored> in 5 seconds, the hour numbers start flickering, press <⑥
button>or <⑦
DOWN button> to adjust the hour time, please set the hour time in 5 seconds.
5) Follow the same procedure in 4) to set the minutes time.
6) Press<③ Volume up/Time set/Next stored> again or wait 5 seconds, the minutes numbers will stop flickering, then the
screen numbers show the time you set.
2. How to set alarm clock?
1) Long press <④ Volume down/Alarm clock/Previous stored>, the alarm clock icon
ing, you need to set the alarm clock hour time in 5 seconds.
2) Press <⑥ UP button> or <⑦ DOWN button> to set the hour time, then press <④ Volume down/Alarm clock/Previous
stored> again, the minutes numbers start flickering, you need to set the alarm clock minutes time in 5 seconds.
3) Press <⑥ UP button> or <⑦ DOWN button> to set the minutes time, the minutes numbers and
to back to clock mode.
4) Press <④
Volume down/Alarm clock/Previous stored> again to finish the setting and check the alarm clock time, the
numbers and
will stop flickering after 3 seconds (Attention: Once
been set).
3. How to stop the alarm clock?
DOWN button> to search for the next or previous available channels around you,
Volume down/Alarm clock/Previous stored> to select the stored
DOWN button> to select 12 or 24 hours mode , the screen numbers will flash 5 seconds,
⑨
is on the screen, it means the alarm clock has
EN
⑩
and the hour numbers start flicker-
will flash 5 seconds
UP
Need help?
Do you have a question about the J-157 and is the answer not in the manual?
Questions and answers