Table of Contents
Advertisement
Description
7. Other Settings
Press "MENU" key when the device is standby, Press "ENTER" key to enter the submenu
7.1 Work Mode setting
To set up work mode, press "UP" or "DOWN" to choose "1: Work Mode". Press
"ENTER to save the setting and exit
7.2 Telephone line polarity setting
To set telephone line polarity mode, one is "Normal", another is "Reverse"
This function is for payphone billing system purpose
7.3 SEND FLAG setting
7.3.1 Press "UP" or "DOWN" to choose "3: SEND FLAG", Press "UP" or "DOWN" to select
send out mode.
7.3.2 "PRESS # TO SEND": Allow user to send out the dialing number immediately by
press "#"
7.3.3 "WAIT 5S TO SEND": Do not allow user to send out the dialing numbers
immediately by press "#", the calling number will be sent out after 5 seconds waiting
(Pulse Dialing Delay). Under this mode, if user presses "#" key after dialing, then "#"
will be sent out as a valid symbol
7.4 Speed dialing setting
This function is available for GSM routing only. 30 groups speed dialing numbers can
be set. The maximum length of each group is 8 digits.
7.4.1 Press "MENU" key when the device is standby. Press "UP" or "DOWN" to enter item
"4: GSM SEND LEN".
7.4.2 LCD will show "GSM SEND LEN—XX" on the first line, XX means the group number.
The second line is the speed dialing list.
For example:
1. *3314#
To adjust the microphone volume to level 1 and to
adjust the speaker volume to level 4
8
Advertisement
Table of Contents
