Advertisement
USER GUIDE
Model: Alpha 65
STEPS TO JUMP START YOUR VEHICLE
Step 1
Insert the jumper cable into the jump
starter and connect the clamps to the car
battery.
ABOUT THE FORCE START FUNCTION
Why the screen shows nothing when you try to start your car ?
If the screen doesn't display anything when you have correctly connected the clamps to your car, it means that your battery voltage is
extremely low, you can use the Force Start Function to enter boost mode.
3 steps to fix your problem:
1. Check the clamps connection and the product's battery is above 20%.
2. Press the Power Button and Flashlight Button simultaneously for 2-3 seconds.
3. The screen shows "READY", and go back to start engine ignition.
WARNING: WHEN USING THE FORCE START FUNCTION, AUTO-DETECTION AND SAFETY FEATURES WILL BE DISABLED.
ABOUT THE ERROR CODES
Error Code
''+''and ''-'' poles of battery clamps reversed.
The voltage of the car battery is between 2-8V.
The product's operating temperature is too high / low.
Charge the device at extremely low or high temperature.
Jump start the battery more than 5 times within 10
minutes, the product will automatically enter the safe
mode.
Step 2
''READY'' sign shows on the screen.
Reason
1200A
12,000mAh
PEAK AMPS
BATTERY CAPACITY
Step 3
Start your car engine.
Solution
Reverse the clamps and ensure the correct connection.
Press the Power Button and Flashlight Button
simultaneously for 2-3s to start force output.
(Force Start Function)
Please store it back to where the temperature is
between 32°F to 113°F.
Please charge the device at room temperature.
The safe mode will be off automatically after 10
minutes waiting. (Please do not turn off the product
during the process)
6.5L
4.0L
GAS
DIESEL
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hulkman Alpha 65
Summary of Contents for Hulkman Alpha 65
- Page 1 USER GUIDE 1200A 12,000mAh 6.5L 4.0L Model: Alpha 65 PEAK AMPS BATTERY CAPACITY DIESEL STEPS TO JUMP START YOUR VEHICLE Step 1 Step 2 Step 3 Insert the jumper cable into the jump ‘’READY’’ sign shows on the screen. Start your car engine.
- Page 2 2.Press briefly to switch the light modes.•50% Lumen Light → 100% Lumen Light → White Strobe Light → White SOS Light CHARGER YOU ALPHA 65 JUMP STARTER Fully charge your Alpha 65 jump starter in 45 minutes with our patented 65W recharge technology. IN/OUT Plug the cable into the USB-C output port to charge your device.
Need help?
Do you have a question about the Alpha 65 and is the answer not in the manual?
Questions and answers