Odor Crusher Closet Clean Instructions For Assembly

A1 A2
10 ea 3 ea
End connector End connector
D
2 ea
Pole w/ Male End
STEP 1.
Start by assembling the top, middle and bottom sections. Insert parts
as shown below.
Top Section:
E
Middle Section:
Bottom Section:
Note: All metal parts
must be inserted rmly and
completely into the plastic parts.
Match lettered poles with
the (A2) holes in end connector.
STEP 2.
Building
up from the
assembled bottom
section, insert poles
(B) and (C) and
end connectors
(A1) and (A2) as
the diagram shows.
STEP 4.
Continue building
up from the assembled middle
section by inserting poles
(B) and (C) and end connectors
(A1) and (A2) as the diagram
shows.
NEED HELP? Please contact our customer service BEFORE
returning to the store. For help with assembly, or if you are
missing a part, please contact our Customer Service Department
at 1-877-575-3173 or email cs@odorcrusher.com.
Closet Clean – Instructions for Assembly
B
2 ea
Shelf w/ Male End
E F
2 ea
Pole
Note: Shelf (C) should
be inserted into the stickered
side of (A2).
E
G
D
C
G
C
F
F
F
F
F
H
F
H
STEP 3.
Place the assembled
middle section onto the top of
the vertical poles.
F
F
F
F
H F
F
H
C
4 ea
Shelf
20 ea
Pole w/ 2 Male Ends
D
B
B
F
F
STEP 6.
fabric shell over the frame to complete assembly.
An opening is located on either side of the back of the
fabric to allow the Ozone Machine power cord to run
F
though and plug into a wall outlet.
F
STEP 7B.
Machine by attaching
F
Hanging Bracket to
F
End Connector (A1).
F
F
Ozone Machine Instruction Manual
Customer Service Line: 1-877-575-3173
www.odorcrusher.com | cs@odorcrusher.com
MoJack Distributors, LLC | 3535 N. Rock Road, Wichita, KS 67226
G
2 ea
Pole
STEP 5.
Place the assembled top
section onto the top of the vertical poles.
Assembly of the frame is now complete.
Once the frame is fully assembled, place the
STEP 7A.
the Ozone Machine. Attach the
Hanging Bracket on the back of
the Ozone Machine.
Hang Ozone
See the
for operating settings.
CAUTION! Read the Ozone Machine
Instruction Manual and warning label tags
carefully before operation.
Two Year Limited Warranty
www.theMoJack.com
Ozone Machine
Hanging Bracket
H
4 ea
Pole w/
Male End
Hanging option for
011623