LISTENING MODE hope that it will meet your expectations. To ensure appropriate functioning of COPY GROUP the product, please peruse this User Manual. ADD TO NETWORK ASSIGN ZOW7 AS SECONDARY LISTENING MODE COPY GROUP REMOVE FROM GROUP ASSIGN ZOW7 AS SECONDARY...
Page 2
Internet gateway. PRIMARY controller – It can change settings of the Z-Wave The ZOW7 control keypad is designed for the remote control of devices The ZOW7 control keypad is designed for the remote control of devices PRIMARY controller –...
ANGIELSKI OPERATION Arkusz3 CONTROL KEYPAD PREPARATION Place the batteries as shown in the picture before you start using the ZOW7 CONTROL MODES Place the batteries as shown in the picture before you start using the ZOW7 control keypad. CONTROL MODES gramu, w którym tworzone są...
Arkusz4 QUICK STRT gramu, w którym tworzone są instrukcje. estrzeganie uwag. This function allows to add the device to the Z-Wave network, while assigning it to selected group. Arkusz4 TŁUMACZENIE ANGIELSKI gramu, w którym tworzone są instrukcje. estrzeganie uwag. Hold simultaneously DOWN and Using UP / DOWN buttons select TŁUMACZENIE...
Page 5
This function allows to add the device to up to 7 groups. A maximum of 12 devices can be added to each group. Only those devices can be added to the group which have already been added to the Z-Wave network. TŁUMACZENIE...
Page 6
This function allows to add devices to the Z-Wave network without adding them This function allows to add devices to the Z-Wave network without adding them SECONDARY. The ZOW7 control keypad – page 9. Controller of other type – to group. Once this procedure is completed, add devices to group (page 5).
Arkusz7 COPY GROUP gramu, w którym tworzone są instrukcje. estrzeganie uwag. This function allows to copy selected group to another controller in the same Z-Wave network. TŁUMACZENIE ANGIELSKI Arkusz7 Using LEFT/RIGHT buttons select the Hold simultaneously DOWN group which you want to copy.
LISTENING MODE Advanced function. Hold simultaneously DOWN and Using UP / DOWN buttons select The ZOW7 control keypad remains in the listening mode for 12 seconds after STOP buttons until one of LEDs starts Advanced function. function 5. the end of data transmission Accept using STOP button.
Page 9
TŁUMACZENIE can be of any type. Devices must be added to selected group of the controller (ZOW7 control keypad – page 7, controller of other type – see its user manual) in order to be controlled by SECONDARY controller. ANGIELSKI...
This function allows to remove the device from the group without removing from the Z-Wave network. The device can be added again to the group of any remote control in the same Z-Wave network. TŁUMACZENIE...
Arkusz11 REMOVE FROM NETWORK gramu, w którym tworzone są instrukcje. estrzeganie uwag. Devices can be removed from the Z-Wave network only using PRIMARY controllers. TŁUMACZENIE ANGIELSKI Hold simultaneously DOWN and Using UP / DOWN buttons select Arkusz11 STOP buttons until one of LEDs starts function 3.
Arkusz12 REMOVE GROUP gramu, w którym tworzone są instrukcje. estrzeganie uwag. This function allows to remove the entire group of devices. Device control is possible only after re-adding it to the group (page 5). TŁUMACZENIE ANGIELSKI Hold simultaneously DOWN and Using UP / DOWN buttons select Arkusz12 STOP buttons until one of LEDs starts...
(page 11) and added again (page 4 or 5 and 6). TŁUMACZENIE SECONDARY CONTROLLER RESET – It removes all information about the Z-Wave network, groups, etc. Controlling devices is possible only after ANGIELSKI SECONDARY controller has been added again (page 9) and devices have been added to the group (page 5).
ADDITIONAL INFORMATION ADDITIONAL INFORMATION Programming In the AOR Z-Wave, AOR Solar roller shutter, the ADDITIONAL INFORMATION mode. programming mode is reached by pressing the "P" BATTERY LEVEL Programming In the AOR Z-Wave, AOR Solar roller shutter, the programming button twice. Entering the programming mode.
12 seconds. Invalid button sequence. Run the procedure while maintaining required order of operation. 2. Device can not be added to the Z-Wave network using ZOW7. The device is added to other Z-Wave REMOVE FROM NETWORK (page network.
- The device has been used in accordance with its intended use as per user manual. - Damage is not a result of improperly made electrical system or atmospheric phenomena. WARRANTY - The manufacturer is not liable for damage which occurred as a result of improper use or mechanical damage.
Need help?
Do you have a question about the ZOW7 and is the answer not in the manual?
Questions and answers