Advertisement
Technical Parameters
Detection Range
Detecting Gas
Working Voltage
Working Current
Output Method
Response Time
Recovery Time
Working Temperature
Working Humidity
Preheat Time
Mounting Diagram
1.
Wall mount, hole diameter 4 mm, pitch 36 mm
2.
DIN 35 mm rail mount
Notes
1.
Confirm the polarity and the voltage of the power supply before powering ON the sensor.
2.
The analog output of this module is non-linear. When connect to microcontroller, it should be connected to ADC interface of the microcontroller.
3.
The relationship between the resistance ratio and the concentration is a logarithmic relationship.
10 1000 PPB
Ozone
24 VDC ± 0.2 V
<150 mA
0 10 V (Non-linear)
>3 sec
≤60 sec
-10~50 °C
<95% RH (Non condensing)
Not less than 2 hours, longer pre-heat time, more stable output
2
Advertisement
