Download Print this page

Infinite L-Com SRAQ-G213 Manual

Ozone transmitter

Advertisement

Quick Links

OZONE TRANSMITTER
User Guide for SRAQ-G213
Product Description
The SRAQ-G213 gas sensor module detects the presence and concentration of Ozone (O
signal corresponding to the gas concentration. The SRAQ-G213 has high sensitivity and selectivity to ozone, and can detect gas concentration in the
range of 10-1000 ppb.
Features
High sensitivity and good selectivity to O
24 VDC power supply
Fast response
Analog output
Wall or DIN rail mountable
Applications
Food processing and preservation
Medical hygiene / disinfectant
Water disinfection
General environmental air quality monitoring
Thank you for choosing L-com product. To ensure safe, accurate performance and product longevity, please take a moment to familiarize yourself
with this manual before powering the device. Please keep it handy for future reference. In case of any questions regarding the installation or use of
product, please call us at 800.341.5266.
Reach out to us at customerservice@l-com.com and visit our website at www.l-com.com
3
1
) gas. Integrated circuitry produces a non-linear voltage
3

Advertisement

loading

Summary of Contents for Infinite L-Com SRAQ-G213

  • Page 1 OZONE TRANSMITTER User Guide for SRAQ-G213 Product Description The SRAQ-G213 gas sensor module detects the presence and concentration of Ozone (O ) gas. Integrated circuitry produces a non-linear voltage signal corresponding to the gas concentration. The SRAQ-G213 has high sensitivity and selectivity to ozone, and can detect gas concentration in the range of 10-1000 ppb.
  • Page 2 Technical Parameters 10  1000 PPB Detection Range Detecting Gas Ozone Working Voltage 24 VDC ± 0.2 V Working Current <150 mA Output Method 0  10 V (Non-linear) Response Time >3 sec Recovery Time ≤60 sec Working Temperature -10~50 °C Working Humidity <95% RH (Non condensing) Preheat Time...
  • Page 3 Electrical Diagram 24V and GND are the power interface, D1 is the power indicator. Aout is the analog output interface, VR2 is the signal trimmer potentiometer. VR1 is the magnification (the output of 0-5V and 0-10V can be adjusted freely through this potentiometer). The load resistance of the sensor composed of R7 and RP2 potentiometer is in parallel relationship (can be changed by user).