Advertisement
1. Remove the volume and channel knobs,
these just pull straight off.
3. Carefully lift of the speaker side and remove
the speaker connector from the pcb.
5. Slide the front head shell away from the radio body.
7. The LCD assembly removed.
9. push these tabs back with the flat blade
screwdriver so they are not catching
on the pcb and gently remove the pcb.
GME TX3500/S LCD Screen fitting Instructions
2. Undo the 4x case screws on both sides if the unit.
4. Unscrew and remove the nuts and washers.
6. Remove the LCD assembly from the header pins
from the radio. It should easily come off.
When re-assembling, make sure that all the pins
line up before re-attaching.
8. Unscrew the 2x screws.
10. This is a tricky bit: Gently prise off the metal LCD
housing from the plastic holder. You may have to
straighten the metal tabs with the pliers so they
pass freely through the plastic holder.
Advertisement
