• The SES-logger must not be disassembled. No guarantee is valid if the logger has been disassembled. • Relianeering AB take no responsibility for any other use than described in this manual. It is important to read and understand this instruction manual before using the SES Logger.
8. System indicator (2’) minutes to transfer the files. When become green. 9. Micro USB port (for all files are transferred, the logger charging only) empty its memory. Relianeering AB Simple – Easy – Smart Relianeering AB Simple – Easy – Smart...
11’ LED lights in Close the cap. blue Move to next CM point. Note: 11’ LED in green-yellow indicates that data are on the logger memory. Relianeering AB Simple – Easy – Smart Relianeering AB Simple – Easy – Smart...
Page 5
5 minute. 8. ReSES.net access (login, sites, machines, measurement point overview etc.) 9. Communication log (data transfer log between logger, mobile device and cloud) Relianeering AB Simple – Easy – Smart Relianeering AB Simple – Easy – Smart...
• Within a few hours from starting charging 10’ LED should change the colour from red to yellow and when is full charge to green. • Check the USB cable and power supply. Relianeering AB Simple – Easy – Smart Relianeering AB...
Page 7
The measurement is initiated and logger is settling mode for 5 Blue If none of the actions above help, please contact technical support seconds. for assistance (support@relianeering.com). Show the progress of measurement. First starts 2’ до 2’ and in 3 seconds all LEDs become blue. NOTE: For the Long 12’...
Need help?
Do you have a question about the SES-LOGGER HW-SES-KIT01 and is the answer not in the manual?
Questions and answers