Table of Contents
Advertisement
Page
Former
3-2
ILCE-3000K_L2
&
: Points added portion
New
Assembly-9: Notes on Assembling the ST ASSY
Suffix-1 and suffix-2 of part number exist in the ST Assy
(771).
Check whether the Rib A of the Cover ST (771) contained
in the part of part number suffix-1 is cut.
If the Rib A is not cut, cut it as shown below.
Insert a nipper in the direction of arrow and cut
the Rib A of the Cover ST (771). (Rib B need not be cut.)
Cover ST (771)
Rib B
Rib A
Rib A
Nipper
Confirm that cut surface of the Rib A does not protrude
out of portion A.
Cut surface of the Rib A
NG
OK
Portion A
After that, draw a circle with a permanent marker as below.
Size and color are arbitrary.
Circle
Page
Former
3-2
– 3 –
&
: Points added portion
New
Cushion (ST)(771) is stuck to the part of part number suffix-1
of the ST Assy (771).
Remove the cushion (ST)(771) so that no adhesive remains.
This work is not necessary for the part of part number suffix-2
of the ST Assy (771).
ST Assy (771)
Cushion (ST) (771)
After that, draw a circle with a permanent marker as below.
Size and color are arbitrary.
Circle
Advertisement
Table of Contents
