Bosch ADS 625X Quick Start Manual page 12

en-US | 1 2 | Quick Start Guide| ADS 625X for ADAS
ADAS Computer Vision Positioning Screen
The guided tour also includes Bosch's innovative ADAS computer vision positioning
system to aid in accurate and speedy setup and calibration of a vehicle's ADAS systems.
Your screen may look slightly different based on selections and process. When out of
tolerance, the green checkmark icons are replaced with red icons.
1. Wheel Clamp Targets
Left and right wheel clamp targets camera
view, including camera controls for
exposure and zoom
2. Required Set-up Distance
The required set-up distance of the ADAS
recalibration fixture to the vehicle is a static
value, dependent on vehicle and ADAS
system selection
3. Forward/Backward Position
The dynamic (forward/backward) position
value of the ADAS recalibration fixture
relative to the vehicle
1699504264 | VER 01 | 06.2022
4. Left/Right Position
The dynamic (left/right) position value of
the ADAS recalibration fixture relative to
the vehicle
5. Angular Position
The dynamic (clockwise/counterclockwise)
angular position value of the ADAS
recalibration fixture relative to the vehicle
(This screen shows the setting within
tolerance. Your screen will vary. When out
of tolerance a crosshair and dynamic value
is shown.)
© Bosch Automotive Service Solutions Inc