Advertisement
Assembly 69-231O-473-chr
1
Attaching the seat and back
□
Attach the back (A) to the seat (B) by aligning holes on the
seat (B) with the holes on the back (A) and inserting bolts (BB)
with washers (CC).
□
Tighten half way using the Allen wrench (DD).
□
Do not tighten completely at this stage.
CC
BB
DD
3
Securing the front skirt
□
Secure the front skirt of seat (B) to the left arm (C) and right
arm (D) using bolts (AA) and washers (CC).
□
Tighten half way using the Allen wrench (DD).
□
Do not tighten completely at this stage.
C
A
DD
CC
AA
CC
AA
B
D
A
2
Attaching the left and right arm
□
Attach the left arm (C) and right arm (D) to the seat (B) and back (A)
by aligning side holes on the seat (B) and back (A) and inserting
bolts (AA) with washers (CC).
□
Tighten half way using the Allen wrench (DD).
□
Do not tighten completely at this stage.
C
B
4
Completing the assembly
□
Check the assembled chair and make adjustments if needed.
□
Fully tighten all bolts (AA) and (BB) with the Allen wrench (DD).
□
Attach all plastic caps (EE).
6
DD
CC
AA
A
B
DD
CC AA
BB
AA
D
DD
EE
DD
EE
Advertisement
