Niles iPower AC-6 Installation & Operating Manual page 14

Placement
It is recommended that the AC-6+ be placed in a location easily reached when manually
operating the other controls in the system. There should be a clear line of sight between the
operator and the unit to allow easy user feedback of system status. The AC-6+ should be placed on
a flat, stable shelf or platform or, if desired, it can be wall mounted. See the following section for
directions on wall mounting. IMPORTANT: Be sure to follow the "Safety Precautions" in the front
of this manual to ensure proper product performance and safety.
Wall Mounting
Once you have decided where your AC-6+ should be placed, you may wish to permanently mount
it in that location. Mounting screw slots are provided on all AC Series iPOWER
purposes. On the back of each unit you will find a series of L-shaped slots designed to
accommodate mounting screws. The L-shape of the openings allows for both vertical and
horizontal positioning of the unit. Additionally because the screw hole distances are uniform you
can rotate the unit without having to reposition the screws (see illustration).
After you've located the desired positioning you can mark the distance between the screw locations
using the special indents found on your AC iPOWER
11
™ unit (see illustration).
Once you've located your desired positioning you can
mark the screw locations using the special indents
found on your AC iPOWER
screw hole distances are uniform you can rotate the
unit without having to reposition the screws.
™ products for such
unit. Plus, because the
™