Unit Details - Niles iPower AC-6 Installation & Operating Manual

UNIT DETAILS

Power Button turns on
Switched outlets and
puts Triggered outlets
into standby mode for
remote triggering.
Switched LED indicates the
status of the Switched
outlets and that Triggered
outlets are in standby mode.
Ground OK LED indicates
that the wall outlet wiring is
properly grounded.
Line OK LED indicates
that the wall outlet is free
of any problems such as a
polarity inversion.
Dual Zone 12V Input
Triggers enable you to
turn on your system from
either of two components
(includes unique 12V DC
200mA wall adapter for
triggering a device).
Bus Output Trigger
enables the 12V inputs to
automate turn-on of other
iPOWER products or
protected equipment
whenever the 12V trigger
input is used.
Rugged steel chassis with
molded rubber endcaps can
be wall or floor mounted.
7
The AC-6+ features three pairs of premium quality, wall transformer-spaced
outlets. One outlet is Always On, one outlet is Switched on by the power
button, and two pairs are Triggered on via either of the 12V trigger inputs.
Patent pending i3 ™ power
protection circuitry ensures
protection time after time.
15 Amp Circuit UL 1449
2nd Edition Listed
Breaker.
6 ft. industrial grade,
high-current handling
power cord with flat,
360º rotating plug.