Advertisement
Read this first!
Notes on replacing the air filter unit
Turn off the power before you replace the air filter unit.
z
When attaching the air filter unit, make sure that the projector is stable, and work in
z
an environment that is safe, even in the event of the air filter unit dropping.
Do not operate the projector with the filter removed. Dust may accumulate on the
z
optical elements degrading picture quality.
Do not put anything into the air vents. Doing so may result in malfunction of the
z
projector.
The air filter unit to be replaced should be an unused product.
z
Replacing the unit
The air filter units are provided in the side and back of the projector.
Replacement of the air filter unit (side)
J
1) Remove the air filter cover.
Open the air filter cover in the direction of the
z
arrow as the figure shows and remove it.
2) Remove the air filter unit.
i) H old the knob of the air filter unit and pull out it
in the direction of the arrow, then the top of the
air filter unit will pop up.
ii) Take out the air filter unit upwards.
After removing the air filter unit, remove large
z
foreign objects and dust from the air filter
compartment and the projector's air intake port
if there are any.
3) Insert the new air filter unit.
Hold the air filter unit and make sure that the
z
knob is outside of the projector, then perform
Step 2) in the reverse order.
Do not press the filter part when push it into the
z
projector at last.
4) Install the air filter cover.
Make sure that the air filter cover is closed
z
tightly.
E-2
Air filter cover (side)
Knob
Air filter unit (side)
Advertisement
