Advertisement
Quick Links
SERVICE MANUAL
Ver. 1.0 2016.03
Photo: SS-RT3
• SS-RT3 is Bar speaker in HT-RT3.
• SS-SRT3 is surround speaker in HT-RT3.
• All the units included in the HT-RT3 (SA-WRT3, SS-RT3/SRT3,
remote control) are required to confi rm the operation of SS-RT3/
SRT3. Check in advance that you have all the units.
9-890-681-01
Sony Corporation
2016C81-1
©
2016.03
Published by Sony EMCS (Malaysia) PG Tec
SS-RT3/SRT3
SPECIFICATIONS
Bar Speaker (SS-RT3)
Front L/Front R/Center speaker section
Speaker system
Full range speaker system, Bass refl ex
Speaker
40 mm (1
5
/
in) × 100 mm (4 in) cone type × 3
8
Dimensions (w/h/d) (approx.)
900 mm × 52 mm × 70 mm
1
1
7
(35
/
in × 2
/
in × 2
/
in)
2
8
8
Mass (approx.)
2.1 kg (4 lb 11 oz)
Surround Speakers (SS-SRT3)
Speaker system
Full range speaker system, Bass refl ex
Speaker
65 mm (2
5
/
in) cone type
8
Dimensions (w/h/d) (approx.)
80 mm × 191 mm × 70 mm
1
5
7
(3
/
in × 7
/
in × 2
/
in)
4
8
8
(projecting parts not included)
Mass (approx.)
0.75 kg (1 lb 11 oz)
Design and specifi cations are subject to change without notice.
Canadian Model
Australian Model
Photo: SS-SRT3
SPEAKER SYSTEM
US Model
AEP Model
UK Model
E Model
Advertisement
Related Manuals for Sony SS-RT3
Summary of Contents for Sony SS-RT3
- Page 1 • SS-RT3 is Bar speaker in HT-RT3. • SS-SRT3 is surround speaker in HT-RT3. • All the units included in the HT-RT3 (SA-WRT3, SS-RT3/SRT3, remote control) are required to confi rm the operation of SS-RT3/ SRT3. Check in advance that you have all the units. SPECIFICATIONS...
- Page 2 SS-RT3/SRT3 SECTION 1 EXPLODED VIEW Note: • -XX and -X mean standardized parts, so • The mechanical parts with no reference • Abbreviation they may have some difference from the number in the exploded views are not sup- : Australian model original one.
- Page 3 SS-RT3/SRT3 1-2. SS-SRT3 Ref. No. Part No. Description Remark 4-582-961-01 FOOT (EL-SUR) A-2107-077-A SS-SRT3L//M(A)(UC) A-2107-080-A SS-SRT3R//M(A)(UC) not supplied...
- Page 4 SS-RT3/SRT3 REVISION HISTORY Ver. Date Description of Revision 2016.03 How to search for a contact point of signal lines or the like in DIAGRAMS SECTION If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use the PDF fi...