Advertisement
Please read the manual carefully before using this appliance and keep them for future reference.
The product is subject to the real object.
Structural diagram of float valve
Tips:
Confirm that the float valve, block proof cover and seal ring are correctly installed before use each time;
Before putting the inner pot into the cooker each time, please remove the dirt and water from the external side of the inner pot and internal side of the external pot;
Please move the product with the handle of the cooker body; Please remove the water from the housing cover with cloth.
Note:
Please make sure the appliance is unplugged before cleaning!
Taking "soup" for example, other options include Fry, Stew, Meat, Fish, Rice, Bread, Pasta, Vegetable, Slow cook, Yoghurt, Desserts, Bake, Cake, Steam
Eg: Preset "Meat", Start cooking at 7:30 the next day. (Preset time refers to count down time. If it's now 10:30 pm, the preset time should be 9:00).
Note: Fry, Yoghurt, Desserts, Cake cannot be preset.
"Add ingredient" function is available for "Stew, Meat, Soup" functions.
Take Pasta as an example (other functions include Fry)
When you think the product has a malfunction, please check and confirm the following situations before taking it to service center.
Problem | Possible Reason | Solutions |
Difficult to close the lid | Sealing ring not installed properly | Position the sealing ring well. |
Lid handle is not at the lid open position | Turn lid handle to lid open position | |
Lid handle gets stuck | Send the appliance to repair service for overhaul | |
Difficult to open the lid | Pressure exists inside the cooker | Wait till safety valve completely drops down |
Float valve stuck | Pat the lid | |
Remove steam vent, press the float valve lightly with sharp object. If it doesn't work, send it service center. | ||
Leakage from lid | The sealing ring wore out | Replace the sealing ring |
Food debris attached to the sealing ring | Clean the sealing ring | |
Food debris attached to float valve gasket | Clean float valve gasket | |
Float valve gasket wore out | Send appliance to repair network to replace float valve gasket | |
No float valve installed | Install float valve | |
Heating plate doesn't heat in operation state. | The lid is not closed properly | Close the lid again |
Heating base malfunction | Send the appliance to repair service for overhaul | |
Circuit malfunction |
If the fault is not removed after above check, please contact our authorized service center for repair.
Display anomaly judgement, please take the appliance to local dealer or service center for repair or installation.
Indicator state | Abnormal display | Possible Reason | Solutions |
Display | ![]() | Open circuit of bottom sensor | Please return the appliance to service center for repair. |
Display | ![]() | Short circuit of bottom sensor | Please return the appliance to service center for repair. |
Display | ![]() | Short circuit of upper housing sensor | Please return the appliance to service center for repair. |
Display | ![]() | Overtemperature protection | Please check whether there is water or food in the pot; press "Cancel" button after adjustment, the appliance can be normally used after beep stops; otherwise, send it to repair network. |
Display | ![]() | Open circuit of press switch | Please return the appliance to service center for repair. |
Model | Rated voltage/Rated frequency | Rated power | Capacity | Working Pressure |
MY-SS5051P | 220-240V~ 50/60Hz | 900W | 4.8L | 70kPa |
To avoid personal injury and property loss, be sure to observe the following safety precautions.
![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ||
![]() | ![]() | ![]() |
All contents of this manual have been carefully checked. In case of any printing errors and omissions or any resulting misunderstanding, please consult us.
Note: This product is subject to any technical improvement which will be incorporated into the new version of this manual in the future without the prior notice. Any change in the appearance and colour of the product is subject to the real object.
DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
This appliance is labeled in compliance with European directive 2012/19/EU for Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is disposed of correctly, you will help prevent any possible damage to the environment and to human health, which might otherwise be caused if it were disposed of in the wrong way.
The symbol on the product indicates that it may not be treated as normal household waste. It should be taken to a collection point for the recycling of electrical and electronic goods.
This appliance requires specialist waste disposal. For further information regarding the treatment, recovery and recycling of this product please contact your local office, your household waste disposal service, or the shop where you purchased it.
For more detailed information about treatment, recovery and recycling of this product, please contact your local office, your household waste disposal service or the shop where you purchased the product.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the MY-SS5051P and is the answer not in the manual?
Questions and answers