Advertisement
"Sensor" interface will show Soil sensor icon and Rain sensor icon. The switch button is in gray color, it means the sensor haven't connect yet.
Screw off the sensor battery door and install the batteries to the soil sensor near our Wi-Fi water timer. After installing the batteries, the GREEN LED light will turn on for few seconds.
After the green LED light turn off, please press and hold the button at the back of the sensor for five seconds until the RED LED light turn on, it means the sensor is ready for connecting.
When the RED light turn on, please tap the soil sensor button at the App, it will automatically search and connect the sensor, it will take around 10 seconds. After connected, the soil sensor icon will turn to green color and show the battery power level in APP. Switch to "Parameter" interface, user will see the soil data.
After confirm connected, screw the battery door, insert into the earth where you needed. The distance between Soil Sensor and Wifi Water Time must within 60 meters in open area.
Left key is to set humidity level
Right key is confirm button/ test now button
After finishing connection, press and hold the two buttons for 5 seconds, user can wake up the program, the LED light will show the current Soil moisture level. 5 LED lights indicate 5 levels of soil moisture levels: 20%, 40%, 60% 80% and 100% (Volume Water Content).
When wake up the LED light, press the Left button, user can set the "Stop Watering Soil Moisture Level", default humidity is at 60%. After setting, press Right button or wait for 20 seconds to confirm.
When wake up the LED light, press the Right button, user can check the current soil moisture level. (User can view the accurate data through our APP).
After setting the"Stop Watering Soil Moisture Level" and pair successfully, the Wi-Fi water timer will automatically stop watering plan once the Soil moisture reach the setting level.
Communication with indoor unit: RF signal 433 MHz, distance 60 meters
Humidity measuring range: 0-100%
Indicates humidity level: 20%, 40%, 60%, 80%, 100%
Temperature measuring range: -10°C to 60°C
Degree of protection: IP65
Working temperature: -10°C to 60°C
Power supply: 3x AAA batteries (not included)
Dimensions: 135x138x110mm Weight: 260g
Download the Immax NEO PRO app from Google Play or the Apple store.
After connected our Wi-Fi water timer with APP, click the Water Timer icon, switch to "Sensor" interface.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the NEO Soil Sensor that isn't answered in the manual? Leave your question here.