Specifications - Niles RS6Si Installation & Operating Manual

SPECIFICATIONS

Recommended Amplifier Power
10 to 150 Watts
Nominal Impedance
8 Ohm, in one-speaker stereo mode
4 Ohm, in two-speaker stereo mode
Frequency Response
50 Hz to 21kHz
Sensitivity
88 decibels for 2.83 Volts RMS of Pink Noise, measured at 1 Meter on Axis
Wiring Requirements
2-conductor direct burial cable at the following sizes depending on longest length
of cable required (2 per speaker in one-speaker stereo mode):
Wire Gauge
Temperature Extremes
-50° to 185° Fahrenheit
-45° to 85° Celsius
Dimensions
12" (30.48 cm) high x 14" (35.56 cm) wide x 11" (27.94 cm) deep
Weight (Shipping Weight)
23 lbs.
10 kg.
19
Maximum Distance
16 60 ft
14 100 ft
12 160 ft
(18m)
(30m)
(50m)