Advertisement
What's in the Box?
(1) S300 PIN Pad
(1) Adapter Cable
(1) Product Manual
(1) AC Power Adapter
Connections
This unit requires:
• Designated Network Connection
• Power
• Connection to the Point-of-Sale Terminal
Refer to the following images when connecting the device to the Point-of-Sale
Terminal.
The PAX S300 9-Pin Serial Cable Dongle
Step 1
Connect one end of your Ethernet
cable to the RJ45 Ethernet plug (red
connector) of the 9-pin Serial Cable
Dongle. Connect the other end of your
Ethernet cable to your wall jack.
Note: If your dongle is not color-coded,
ensure you connect the cable furthest
from the power input.
Step 2
Connect the male RJ11 connector
(common "phone jack" connector) of
the 9-pin Serial cable to the RJ11 to
9-pin Serial (blue connector) of the PAX
S300 Serial Cable Dongle.
Note: If your dongle is not color-coded,
ensure you connect the cable closest to
the power input.
Step 3
Connect the Male 9-pin Serial cable to
the Female 9-pin Serial to USB adapter
(shown in the image in Step 3).
Step 4
Connect the USB adapter to the Point-
of-Sale Terminal.
Note: A software driver is required
for the USB adapter cable. The drivers
are included on the CD-ROM which
may have been shipped with the
unit. The updated drivers may also be
downloaded from the website.
Advertisement
