Advertisement
Quick Links
Configuring the PAX S300 in MCS Newton
1. Login to Newton, then locate and click on the Admin & Maintenance tab.
2. Locate the Serving Line option in the Point-of-Sale Setup ribbon.
3. Select either Serving Lines or Serving Line Configs. Then select Edit.
4. Select the tab labeled Override Settings and scroll down to Devices.
5. Locate the option for Credit Card Terminal and select into each field to
show the ellipsis.
6. Select PAX S300 or compatible from the drop-down menu. Then,
configure the Capture Signature and Port options. When finished, click
Ok.
7. When finished, select Save & Close.
Note: For assistance with "TAMPERED "Errors, please contact the
Heartland Service Center by email (Paxsupport@e-hps.com ) or phone
(888-909-8498).
Technical Support and Service
MCS Software Product Support
Telephone: (888) 287-6416 Option 2
Hours: Mon-Fri 7am to 6pm EST
Email: MCSSupport@e-hps.com
Heartland School Solutions
Pax S300 Credit Card Reader
MCS®
February 2020
S300-000-364-02NA
Advertisement
Summary of Contents for Heartland Pax S300
- Page 1 5. Locate the option for Credit Card Terminal and select into each field to MCS® show the ellipsis. 6. Select PAX S300 or compatible from the drop-down menu. Then, configure the Capture Signature and Port options. When finished, click 7. When finished, select Save & Close.
- Page 2 9-pin Serial (blue connector) of the PAX Terminal. S300 Serial Cable Dongle. Note: If your dongle is not color-coded, The PAX S300 9-Pin Serial Cable Dongle ensure you connect the cable closest to the power input. Step 3 Connect the Male 9-pin Serial cable to the Female 9-pin Serial to USB adapter (shown in the image in Step 3).