Page 1
Operator’s Manual Parts Manual Rev 1 7/1/2020...
Page 2
Glen Burnie, MD 21061 888-77MULCH www.MulchMateUSA.com Product and Contact Information Please contact your authorized Truck Mate dealer for information and service on your product. Always provide your product model and serial number listed below. Dealer Name: _______________________________ Dealer Address: _______________________________...
Another unique design of the Truck Mate is the removable conveyor system to allow you to use the tarp system to dump bulk material straight onto the ground.
Parts Location 1. Tarp Roller 2. Electrical Access Panel 3. Belt Tension Tool Storage 4. Conveyor Belt 5. Tarp Motor 6. Tarp Gear Set 7. Back Deflector Panel 8. Conveyor Motor (internal) 9. Mounting Support Bar 10. Hitch Mount 11. Control Panel 12.
Page 6
Signal Word Definitions Keep all safety decals clean and legible at all times. Remove dirt, grease and debris from safety decals and instructional labels. If any decals become damaged, faded, illegible or missing, contact your Mulch Mate dealer promptly for replacements. These safety decals and labels are there to help warn and protect you and others. Please take these warnings seriously and refer to the operator’s manual often to stay familiar with all safety information.
Safety General Safety Procedures T raining Requirements ● The owner of this machine is solely responsible for properly training the operators. ● The owner/operator is solely responsible for the operations of this machine and prevention of accidents or injury occurring to him/herself, other people or property. ●...
Safety General Safety Procedures (cont) Operation Safety (cont.) ● Always be alert to what is happening around you, but do not lose focus on the task you are performing. Watch the functions of the machine whenever the machine is on and operating. ●...
Truck Mate Functionality The Truck Mate can be used in multiple different ways. It is designed to replace the tailgate on a pickup truck. When folded up, in its stored position, it functions as a tailgate and will keep whatever is put in the bed of the truck from falling out.
Operating the Unit The Truck Mate is designed to be operated while your truck is running . If the truck is not turned on the Truck Mate will not work. ● Push the toggle switch to “LOAD” to run the tarp and conveyor together.
Covering Load for Transporting ● After loading the truck with material, you will need to cover the load to transport. Preparing for Transport ● Before driving the vehicle, close the conveyor assembly and make sure all latch pins and locks are correctly installed and operating correctly.
Operations Closing the Unit ● Make sure all material is cleared off of the conveyor belt. ● Lower the back mulch deflector. ● Engage the latches on the sides of the conveyor assembly so that the handles are down and the pins are sticking out of the sides.
Seller Indemnified Party may be required to pay to one or more Third Parties resulting from or arising out of (a) personal injury or death of any person as a result of use of any Product supplied or sold by Dawson MFG or its Affiliates or sublicensees or (b) ...