Sunsitt ST23007-010 Assembly Instructions

Armless Lounge Chair
Assembly Instructions
www.sunsitt.com
ASSEMBLY AND CARE INSTRUCTIONS
Product Details
SKU: ST23007-010
PLEASE READ BEFORE ASSEMBLING FURNITURE.
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
10
1
mins
TIME PEOPLE DIFFICULTY

BEFORE YOU BEGIN: FOR YOUR SAFETY

• Keep children and animals away from the work area, small parts could cause
choking if swallowed.
• Two-person assembly is recommended.
• Make sure you have enough space to lay out the parts before starting.
• Check that you have all the components and tools listed in this booklet before
starting assembly.
• Remove all fittings from their plastic bags and separate them into their groups.
• Assemble on a soft, level surface to avoid damaging the unit or your floor.
• Do not stand or put weight on the component parts during assembly, as this
could cause damage.
• Assemble the item as close to its final position as possible.
• Dispose of all packaging materials carefully and responsibly.

CARING FOR SUNSITT SIGNATURE

• Sunsitt Signature cleans quickly and easily. Simply use a damp cloth and mild
detergent; do not use bleach or abrasive cleaners.
• To prolong the life of Sunsitt Signature patio furniture, we recommend storing
it inside during winter or extended periods of bad weather.
2

Components

A B
Seat x 1 Teak Leg x 2
Fittings
D E
Washer x 8 35mm Screw x 8
Ratcheting Allen tool instructions
Position B (Right)
Locate the lever as shown.
Slide the lever to the Position A (Left) to tighten the screws.
Slide the lever to the right Position B (Right) to loosen the screws.
Position A (Left)
Tip:
The ratchet head can be used as a finger ratchet.
Finger tighten by turning clockwise to speed up the process.
3
C
Back Cushion x 1
F
Allen key x 1