Page 2
DAILY CHECKLIST Prior to use, check Sky Climber Hoists, Sky Locks, wire rope and other equipment for wear. DO NOT use hoists or Sky Locks which are damaged or worn beyond normal tolerances.
Page 3
Check chart to determine maximum amount of outreach for your application. If a strongback is required see package 3835-CBT. Roll the assembled Sky Rig into the desired location. Crank the jacks until the load is removed from the casters and the roof rig is level.
Page 5
• The Rigging Collar is designed to be used when intermediate and additional suspension points are required on the Sky Climber Rolling Roof Rig beam. For example: it may be used to reduce the outreach without moving the entire rolling roof rig.
Page 6
It also reduces the quantity of counterweights needed and can eliminate the need for a cable-truss/strongback. The part number for the Sky Rig Corner Adaptor is 3835-0150. Please contact Sky Climber for more information on the use and installation of this product.
Need help?
Do you have a question about the Sky Rig and is the answer not in the manual?
Questions and answers