DANFI AUDIO TE-103 User Manual page 10

10-in-1 record player turntable
Table of Contents

Advertisement

Troubleshooting: CONTACT ----support25@163.com
There is no power?
• Power adaptor is not connected correctly.
• No power at the power outlet.
• Use the wrong adapter instead of he original one included.
• Power button is not turned on, turn the volume/ON/OFF button clockwise to turn on.
My record is skipping or turntable keeps wobbling?
• There are built-in springs inside the turntable to reduce absorption to protect the turntable, so it's normal to
little up and down slightly.
• Use the tone arm lift raise up and down the arm for 10 times before initial spinning.
• Change vinyl records or clean the vinyl records grooves properly.
• The needle is not in the middle of the stylus or broken, replace it.
• Put the record player on the flat surface with 4 legs/corners on the ground.
• The white stylus protector is till on.
Speed of the song is faster or slower?
• Turntable drive belt has slipped off.
• The speed that does not fit your record. Please choose the correct speed and try it again.
Turntable is spinning, but no sound, or not loud enough?
Volume is too low, turn it clockwise to volume up.
Stylus protector is still on.
Tone arm is lift up by the lever.
Volume is not loud enough or not good: connect to the external powered speakers.
USB Recording not working?
USB flash drive is not formatted in FAT/FAT32
USB flash drive has little room for storage
Forget to press the "Record" button to stop the recording when finish.
User didn't short press"M" till enter into recording mode.
no sound when connecting to external speaker?
Not using powered speakers
The speakers are not turned into AUX line-in or RCA mode.
The RCA cable is broken or wrongly conencted
The volume of the external speakers is muted
9

Advertisement

Table of Contents
loading

Related Products for DANFI AUDIO TE-103

Table of Contents