DANFI AUDIO TE-103 User Manual

10-in-1 record player turntable

Advertisement

Quick Links

10-in-1 Record Player Turntable
TE-103 Model
Turntable with USB, FM & Bluetooth Reception
User's Guide
1

Advertisement

Table of Contents
loading

Summary of Contents for DANFI AUDIO TE-103

  • Page 1 10-in-1 Record Player Turntable TE-103 Model Turntable with USB, FM & Bluetooth Reception User’s Guide...
  • Page 2: About Bluetooth

    Instructions Before Start Read the manual before using this product. Keep these instructions for future reference. About Records Never use a record with cracks or warps. Never use a record that is cracked or warped, as this may cause extreme wear and destruction of the needle. Never use unusual play methods such as scratching.
  • Page 3: Parts Illustration

    PARTS ILLUSTRATION: 1. Turntable Platter 2. Turntable spindle 3. 45 RPM adapter 4. Tone arm lift lever 5. Speed selection switch 6. Auto stop ON/OFF switch 7. Tone arm 8. Cartridge 9. Repeat button 1. FM Radio Tune knob 10. SD/TF card slot 2.
  • Page 4 BUTTONS USE ILLUSTRATION: ------------------------POWER ON/OFF Button ----------Long press to power on and off the unit. ------------------------Mode Switch Button ------------- Switch mode between "PHONO-BT-USB-AUX IN-FM-PHONO" -----------------------FM Frequency Tuner ------------- Tune the FM radio frequency between 87.5MHz-108MHz -----------------------USB/TF/SD Card Record Button------Short press to record WAV files into USB stick/SD/TF card -----------------------Volume Button------------------- Turn the knob to adjust the volume -----------------------EQ Sound Effect ------------------Preset 6 sound effect (ROCK/POP/Classical/Jazz/vocal/Normal ).
  • Page 5 PHONO Mode---Playing a Record It is recommended that you use extreme care when manipulating the tone arm, stylus, and other components of this turntable. These parts are very sensitive and can easily break or become damaged if they are carelessly handled. Lock Unlock 1.
  • Page 6 Bluetooth Input--- pairing with Bluetooth 1. Short press “MODE” button on the control panel to switch mode till "BT" shows on the display panel. Bluetooth is ready for connections. 2. Turn on the Bluetooth function on your device, search for and select "BLTD"in your Bluetooth settings to pair, you will hear a beep if your device is successfully connected.
  • Page 7 NOTE:  Make sure that the USB stick / SD card you use has enough space.  For recording, press "Record" button at the start and end of each recording.  This unit does not have a function to automatically separate songs, the recording from the start to the end is recorded as one file.
  • Page 8: Volume Control

    RCA Line-out 1. Connect RCA audio cables(white to white, red to red) to the RCA Audio Output on the back of the turntable, and the other side to the audio input of an external stereo system. 2. Adjust the external stereo system to accept audio input from the turntable. 3.
  • Page 9: Remove The Needle

    AUX IN Connecting to Audio Source AUX-in Mode Requires 3.5 mm audio input cable (not included). Note: When the Source selector is set to Aux In, When a 3.5mm audio cable is plugged into the unit, it will automatically detect the input and power ON in Aux In mode. 1.
  • Page 10 Troubleshooting: CONTACT ----support25@163.com There is no power? • Power adaptor is not connected correctly. • No power at the power outlet. • Use the wrong adapter instead of he original one included. • Power button is not turned on, turn the volume/ON/OFF button clockwise to turn on. My record is skipping or turntable keeps wobbling? •...

Table of Contents