Cleaning The Unit; Parts Identification - Nikon SF-100 User Manual

2.4

Cleaning the Unit

When carrying out routine maintenance and cleaning, ensure
that no volatile liquids such as alcohol, benzine, or thinner come
into contact with the SF-100 as this may cause a failure, fire, or
electric shock.
Please observe the following points:
• Before cleaning, always turn the power off, and pull out the
power plug.
• Since the cover is made from plastic material, remove dust
with a blower or a dry cloth.
Use a soft, dry cloth to remove dust from the metal panel at
the rear.
• If the unit has become badly soiled, clean with a cloth
moistened with neutral liquid detergent, then dry with a dry
cloth.
Avoid harsh substances such as alcohol, benzine, thinner, or
pesticides, as they may damage the surface, or remove the
exterior finish.

3. Parts Identification

Insert Guide
Stickers
Slide Push Plate
Display LED
- 9 -
Magazine Cover
Binder
Slide Push
Plate
Ejection
Magazine
Insertion Magazine