Before Operation; Inspection; Accessories; Notes On Use - Nikon SF-100 User Manual

2. Before Operation

2.1 Inspection

Inspect the package to see whether any damage has occurred
during shipment. If there is any damage to the package, please
contact your retailer directly and do not unpack the unit.

2.2 Accessories

The following items are included with your SF-100. When you
open the package, check whether all the items are present. If
there are any missing items, please contact your retailer
immediately.
SF-100 (1)
SF-100 user's manual (1)
2.3

Notes on Use

• Don't use a slide mount neither less than 1.1mm nor more than
3.0mm thick. If the slide mount is not flat on its surface, you
may feel some roughness when mounting or unmounting the
slide.
• Don't force the slide-mount into or out of the unit if it does not
move smoothly.
• When scanning a film, don't touch or unmount the slide-mount
or strip film holder.
• Keep the unit in a horizontal position.
• Do not use slides with rounded mount edges, as the feeding
mechanism may not work properly with such slides.
The following kinds of slide mounts should not be used as they may
cause a mount jam or prevent proper reading of the image.
• Warped slide mounts
• Slide mounts with peeling or burred edges
• Slide mounts with a sticker or label affixed
• Slide mounts with sharp corners
- 8 -
Viewed from above