Sony ESBK-7046 Operating Instructions Manual page 20

Connections and Settings
Setting the terminator
Set the TERMINATOR switch as follows, depending
on whether or not you will connect the SCSI OUT
connectors of this unit to another disk unit.
• No connection to another disk unit: ON
• Connection to another disk unit: OFF
SCSI 1 to 4
Disk Recorder Board
ES-7 EditStation
This figure does not show all SCSI cables and connectors. When making actual
connections, see the figure on page 18.
20
The figure below shows the DIP switch settings for a
chain of four disk units. Set the TERMINATOR
switch to ON only for the disk unit farthest from the
ES-7, and set it to OFF for all other disk units.
SCSI 1 IN to SCSI 4 IN
SCSI 1 OUT to SCSI 4 OUT
SCSI 1 IN to SCSI 4 IN
SCSI 1 OUT to SCSI 4 OUT
SCSI 1 IN to SCSI 4 IN
SCSI 1 OUT to SCSI 4 OUT
SCSI 1 IN to SCSI 4 IN
1st unit
SCSI ID: 0
TERMINATOR: OFF
1 2 4 OFF
0 0 0 ON
2nd unit
SCSI ID: 1
TERMINATOR: OFF
1 4 OFF
2
0 ON
0 0
3rd unit
SCSI ID: 2
TERMINATOR: OFF
1 4 OFF
2
0 ON
0 0
4th unit
SCSI ID: 3
TERMINATOR: ON
1 2 4 OFF
0 0 0 ON