Advertisement
Table of Contents
Garageflex Assembly Instructions
Product: Golf Activity Centre FX2011E
Package Contents:
7 x Round Tubes
•
1 x Hanging Bracket
•
2 x Side Panels
•
2 x Square Tubing
•
1 x Canvas Bag
•
1 x Shelf
•
8 x Hanger Hooks
•
1 x Holder Base
•
1 x Stick Holder
•
18 x Screws
•
Tools Required:
Electric screwdriver or drill with Phillips driver bit
•
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GARAGEFLEX FX2011E
Summary of Contents for GARAGEFLEX FX2011E
- Page 1 Garageflex Assembly Instructions Product: Golf Activity Centre FX2011E Package Contents: 7 x Round Tubes • 1 x Hanging Bracket • 2 x Side Panels • 2 x Square Tubing • 1 x Canvas Bag • 1 x Shelf • 8 x Hanger Hooks •...
- Page 2 Step 1: Check that you have everything you need ready Step 2: Position the parts as shown below using the screws to fasten together in six places on each side. Please note, the open mesh on the side frames face outwards Step 3: Connect the corner braces as shown above Step 4: Place the four hanger hooks in to the holes provided Step 5: Mount on FlexiPanel or FlexiTrack on your garage wall...
- Page 3 If you have any questions or need some advice regarding your installation, please do get in touch and we will do our best to help. You can contact us on: 01491 579975 | info@garageflex.co.uk www.garageflex.co.uk...
Need help?
Do you have a question about the FX2011E and is the answer not in the manual?
Questions and answers