Download Print this page

GARAGEFLEX FX1301 Assembly Instructions

Folding table with resin

Table of Contents

Download this manual

FX1301 Folding Table with Resin Assembly

Instructions

Package Contents:

1 x Top Bracket



1 x Bottom Bracket



2 x Folding Arm Assemblies



8 x Nuts, washers, yellow caps



1 x Table Top 61x61cm



2 x Stiffeners



8 x Screws



Phillips screwdriver



Pliers



If you have any questions or need some advice, please do call us on 01491 579975 or email us at

info@garageflex.co.uk and we will do our best to help.

Table of Contents

Do you have a question about the FX1301 and is the answer not in the manual?

Page 1 8 x Screws  Tools Required: Phillips screwdriver  Pliers  If you have any questions or need some advice, please do call us on 01491 579975 or email us at info@garageflex.co.uk and we will do our best to help.
Page 2 Step 4: Place the 2 stiffeners on the underside of the table top as shown above. If you have any questions or need some advice, please do call us on 01491 579975 or email us at info@garageflex.co.uk and we will do our best to help.
Page 3 Step 7: With the supplied 1” screw, fasten through the rear 2 holes on each bracket into the stiffener previously installed on the table top. If you have any questions or need some advice, please do call us on 01491 579975 or email us at info@garageflex.co.uk and we will do our best to help.
Page 4 Folding Table Operation If you have any questions or need some advice, please do call us on 01491 579975 or email us at info@garageflex.co.uk and we will do our best to help.