Connecting The Usb Cable; Turn The Camera On - Nikon CoolPix S2 User Manual

To choose a USB option, highlight Interface in the setup menu (
press the multi selector to the right. The menu shown in Step 1 will be dis-
played.
1
Highlight USB.
3
Highlight PTP or Mass storage.

Connecting the USB Cable

1
Place the camera in the COOL-STATION
Turn the camera off and place it in the COOL-STATION (
2
Connect the USB cable
If the computer is not already running, turn it on and wait for it to start
up. Connect the UC-E10 USB cable as shown below. Connect the COOL-
STATION directly to the computer; do not connect the cable via a USB hub
or keyboard.
3

Turn the camera on

Turn the camera on by opening the sliding lens cover.
INTERFACE INTERFACE INTERFACE
USB USB
Video mode
Auto transfer
Exit Exit Exit Confirm Confirm Confirm
USB USB USB
PTP
Mass storage g
Exit Exit Exit Confirm Confirm Confirm
UC-E10 USB cable
2
Display USB menu.
4
Select highlighted option.
80) and
USB USB USB
PTP
Mass storage g
Exit Exit Exit Confirm Confirm Confirm
INTERFACE INTERFACE INTERFACE
USB USB
Video mode
Auto transfer
Exit Exit Exit Confirm Confirm Confirm
8).
47