Inserting The Pcmcia Adapter - Nikon CoolPix 600 User Manual

Inserting the PCMCIA Adapter

If you are using a computer with a PCMCIA type II slot, you can insert the
CompactFlash Card into a PCMCIA adapter (not included).
Inserting the CompactFlash Card
• The adapter should be inserted when
your computer is in the power on mode.
1
Remove the CompactFlash Card from
the camera. (See page 17.)
2
Hold the CompactFlash Card so that
the arrow side faces up and points
toward the PCMCIA Adapter. Securely
insert the card into the PCMCIA
Adapter slot as far as it will go.
3
Hold the PCMCIA Adapter so that the
arrow side points toward the PCMCIA
type II slot of your computer. Securely
insert the PCMCIA Adapter as far as it
will go.
• Depending on the computer, it may be
necessary to turn the PCMCIA Adapter
upside down in order to insert the card.
Removing the CompactFlash Card
1
Remove the PCMCIA Adapter from the
computer.
2
Pull the CompactFlash Card out of the
PCMCIA adapter.
Note
Do not remove the PCMCIA Adapter from
the computer while the computer is working
or while image data is being transferred
between the CompactFlash Card and the
computer (including operation such as
opening and storing images), this will cause
irreversible damage to the memory.
If Windows 95 Explorer is opened
Up to 50 images
are stored in
Ctgxxxx folder
Sub Directory
(DC97)
Identified as
Removable
Hard Disk
Image Data is
displayed as
AUT_xxxx.jpg file
Thumbnail files
are displayed as
THM_xxxx.jpg file
(Contains no image
data substance)
31