Connecting With Bluetooth - Motorola Sprint iDEN i880 User Manual

Connecting With a Data Cable
To use a data cable to connect your phone to a
laptop, handheld device, or desktop computer:
1 Open the connector cover.
2 With the phone's display facing up, insert a data
cable's connector into the accessory connector,
until you hear a click.
3 Insert the data plug into the data port of the
other device.

Connecting With Bluetooth

To use your phone as a modem via Bluetooth, the
laptop, handheld device, or desktop computer you
want to connect to must have a Bluetooth adapter
installed.
Check that the adapter is properly installed, and
then follow the specific instructions outlined in the
connector
device's user guide to connect the device to your
cover
phone.
About Data Transfer Modes
When used as a modem, your phone has these
data transfer modes:
• Circuit data — used for sending and receiving
faxes and for transferring large files
• Packet data — used for small file transfers such
as email
To use these services, you must install the iDEN
Wireless Data Services software (available
separately) and subscribe to a Nextel data services
access plan. For more information on setting up
your computer and your i880 phone for packet and
circuit data calls, go to www.nextel.com.
Using Your Phone as a Modem
89