Using Gps With Map Software - Motorola Sprint iDEN i880 User Manual

GPS Enabled
To change your GPS PIN:
Note: The GPS Enabled security feature must
be turned on in order to change the SIM
PIN.
1 From the main menu, select Settings >
Security > Change Passwords > GPS PIN.
2 Enter the current GPS PIN.
Note: When you receive your phone, your GPS
PIN is 0000.
3 Press A under Ok.
4 Enter the new 4- to 8-digit GPS PIN.
5 Press A under Ok.
6 Enter the new 4- to 8-digit GPS PIN to confirm.
7 Press A under Ok.

Using GPS With Map Software

You can use the GPS feature of your phone to
provide approximate location data to a laptop
computer or similar device that is running
interactive map software such as that made by
DeLorme or Microsoft. This way, if your phone has
good access to GPS signals, your approximate
position on a map can be made available as you
travel in a vehicle.
192
To do this, connect your phone to your laptop (or
other device) with a serial data cable, and set your
phone to transmit data (see "Getting Started" on
page 193). Your phone then provides your
approximate location to the device running the map
software, which displays your location on a map.
Your phone provides an updated location every
second and the map software displays your
changing location on its map.
See "Enhancing GPS Performance" on page
189 for more details on obtaining good location
information.
Note: Because your phone is continuously
determining your location, using the GPS
feature of your phone with map software
uses the phone's battery power quickly.
Software Compatibility
Your phone sends location information to your
laptop or other device using the standard National
Marine Electronics Association (NMEA) format.
Your phone supports output messages in
NMEA-0183 format and supports the following
NMEA-0183 sentences: GGA, GLL, GSA, GSV,
RMC, and VTG.
The map software running on your laptop or other
device must support NMEA 3.0.