Interior Fittings; Aerodynamics - Alfa Romeo Giulia GTA Owner's Handbook Manual

INTERIOR FITTINGS

SEAT BEKT RETAINER FRAME
(GTAm versions)
On GTAm versions, a frame, fig. 189,
is mounted behind the front seats for
anchorage of 6-point harnesses (only
homologated for track use) fig. 190.
189
190
ON-BOARD KIT
Located in the boot, this contains the
following equipment:
a fire extinguisher;
helmet nets.

AERODYNAMICS

ACTIVE AERODYNAMICS - MOBILE
FRONT SPLITTER
The device, fig. 191, which is automatically
managed according to the speed of the
car, provides greater stability at high
speeds, increasing the aerodynamic load
on the front.
An electromechanical system operates
the descent of the mobile front splitter
at high speeds.
04306S0055EM The system does not work at
temperatures close to or below 0°C.
The splitter can also be manually
adjusted to two different positions:
most external ("extended") position
(A) fig. 191. This position further
increases the aerodynamic load on the
front.
most internal ("retracted") position (B)
fig. 191.
04306S0065EM
191
WARNING The most external
("extended") position of the splitter is
allowed only and exclusively for use on
the race track.
For adjustments, refer to the procedure
described below.
NOTE In case of a failure of the mobile
front splitter, the generic failure icon
along with a dedicated message which
identifies the type of malfunction, is
shown on the instrument panel display.
04296S0008EM
215