Receiving A Group Call; Area Selection; Talkgroup Naming - Motorola iDEN i600 Getting Started

RECEIVING A GROUP CALL

No action is necessary to receive a Group Call as long as your unit is
idle (not engaged in an active Phone or Private Call).
Any communication activity within the talkgroup that you select
automatically switches your unit into Group mode. You will receive
the talkgroup transmission as long as your portable is powered on.

AREA SELECTION

When in Group mode, you can send your communication only to
those talkgroup members in a specific location. This is useful when
you know where the individuals (that you wish to reach) are located
within the service area.
1. Press until you see "Group Ready" on your display.
2. Press under "Area".
3. Press to scroll through the targeted areas specified by your
local service provider.
4. Press under "Ok" to select the targeted area. The area
selected appears on the last line of your display.

TALKGROUP NAMING

To add a talkgroup name to your portable, press
.
For instructions on programming IDs and aliases, see "Private Call
ID (Radio) Programming" on page 26.
28
i600
GETTING STARTED
, , ,