Advertisement
4. OPERATION
WARNING! Ensure that you read, understand and apply Section 1 Safety Instructions before operating the pipe bender.
‰
4.1.
Before first use, purge the hydraulic circuit, in order to eliminate any air from the system, as follows:
4.1.1.
Fit jack handle over release valve (fig.1.1) and turn anti-clockwise to open valve.
4.1.2.
Insert jack handle into the handle sleeve (fig 1.2) and pump several times to ensure full internal lubrication and to bleed air from
the system.
4.1.3.
When complete place the handle back over the release valve (1) and turn clockwise to close.
4.1.4.
With the hydraulic unit release valve open and the ram fully retracted, fit the appropriate sized die to the ram.
4.1.5.
Introduce the pipe between die and rollers, positioning it so that the centre of the required bend in the pipe is over the centre of
the die.
4.1.6.
Using the end of the handle, open the release valve and ram will retract under spring tension, drain and refill to bottom of filler plug hole.
5.
MAINTENANCE
5.1.
Maintenance and repair must be carried out by qualified person. Contact your Sealey stockist for details.
5.2.
Check all fittings are tight before each use.
5.3.
Lubricate all moving parts at regular intervals.
5.4.
Always keep the pipe bender clean, dry, and protect from harsh conditions.
5.5.
Should you need to replace the oil ensure the piston is fully retracted. An excess of oil will render the press inoperative.
5.6.
Use only appropriate Sealey hydraulic jack oil. DO NOT use brake fluid. Contact your local Sealey stockist for details. Purge the
system to remove any air.
5.7.
Check your model parts information for spares.
5.8.
Annually, replace hydraulic oil using Sealey Hydraulic Jack Oil with ram fully down,
IMPORTANT: NO RESPONSIBILITY IS ACCEPTED FOR INCORRECT USE OF THE MACHINE.
Hydraulic products are only repaired by local service agents. We have service/repair agents in all parts of the UK.
DO NOT RETURN PRODUCT TO US. Please telephone us on 01284 757500 to obtain the address and phone number of your
local agent. If the product is under guarantee please contact your stockist.
fig.1
.
PBS99/10.V3
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative
versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
2
1
01284 703534
sales@sealey.co.uk
Original Language Version
PBS99/14.V3
PBS99/10. V3, PBS99/14.V3 Issue:4 (HF) 10/08/22
2
1
REGISTER YOUR
PURCHASE HERE
www.sealey.co.uk
Advertisement
