AEG L6FLG49SCA User Manual page 34

34 www.aeg.com
Every time you switch the
appliance on, the appliance
takes 45 seconds to connect
to the network automatically.
When the indicator
blinking the connection is
ready.
To switch the wireless connection off,
press and hold the
buttons for a few seconds simultaneously
until the first acoustic signal:
appears on the display for 5 seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the
buttons for at least 10 seconds
simultaneously until the second acoustic
signal:
11.3 Remote Start
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Start/Pauza
button to start the
programme, but it is also
possible to start a washing
programme remotely. This
function is deactivates when
door is open.
When the App is installed and the
wireless connection is complete, you can
activate the Remote Start:
1. Touch the Remote
indicator
for a few seconds.
stops
and the
and the
appears on the display.
button and the
blinks on the display
2. Touch the Start/Pauza button to
activate the Remote Start before the
indicator stops blinking.
The indicators and
programme summary screen and the
door is locked. Now it is possible to start
the programme remotely.
When touching the Start/
Pauza button after the
indicator
blinking, the Remote Start is
not activated, but the set
programme starts.
To remove the Remote Start, tap on the
Remote button and confirm by
pressing the Start/Pauza button.
11.4 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
Do not switch off or unplug the appliance
during update.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
appear on the
stops