AEG L6FLG49SCA User Manual page 14

14 www.aeg.com
The options are not selectable with all washing programmes. Check the
compatibility between options and washing programmes in the "AutoDose
and options compatibility with programmes" paragraph in the
"Programmes" chapter. An option can exclude another one, in this case
the appliance doesn't allow you to set the incompatible options together.
Make sure the screen and touch buttons are always clean and dry.
Programme di‐
1
al
Display
2
AutoDose Liq‐
3
uid Detergent
touch button
AutoDose Fab‐
4
ric Softener
touch button
Volba touch
5
button
Start/Pauza
6
touch button
For selecting the desired washing programme. Refer to "Pro‐
grammes" chapter for more details.
It provides information about the setting programme. Refer to
"Display" paragraph for more details.
For activating and deactivating the automatic detergent loading.
Refer to "The AutoDose Technology (Autodosing)" chapter for
more details.
For activating and deactivating the automatic detergent loading.
Refer to "The AutoDose Technology (Autodosing)" chapter for
more details.
Press this button repeatedly to activate one of the two following
options:
• Extra máchání
This option adds a few rinses according to the selected wash‐
ing programme.
Use this option for persons allergic to detergent residues and
in areas where the water is soft.
This option increases slightly the programme
duration.
• Skipping wash phase - Máchání
The appliance performs only the rinsing phase, the spinning
and the draining phases of the selected programme.
The corresponding indicator above the touch button illuminates.
Touch this button to start, pause the appliance or interrupt a run‐
ning programme.
option
option