Starting The Programme; Interrupting Programme; Terminate Programme; Switching Off Appliance - Siemens SN63HX52AE User Manual

Table of Contents

Advertisement

Starting the programme

Press
.
a The programme has ended when
the display shows "0h:00m".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 33
¡ The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.

Interrupting programme

Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Press
⁠ .
1.
a The programme is saved and the
appliance switches off.
Press
to resume the pro-
2.
gramme.

Terminate programme

To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
Open the appliance door.
1.
Press
2.
4 seconds.
Close the appliance door.
3.
a All displays light up.
a As soon as the displays are off,
the display shows "0h:01m" and
the residual water is pumped out.
a The programme is cancelled and
ends after approx. 1 minute.

Switching off appliance

Please note the information on
1.
"Safe use" → Page 11.
Press
.
2.
Tip: If you press
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
Basic operation en
for approx.
during the wash
33

Advertisement

Table of Contents
loading

Table of Contents